Installation of a sump pump: cost, additional costs, the dependence of the price of installation on the type of device

If you are constantly faced with flooding in the basement of the house and want to prevent it, consider installing a sump pump. Presented equipment is installed in the basement or a pit, from where it will pump water and divert it to a safe distance outside the house.

Of course, the presented equipment can not be attributed to the cheap. The average cost of a sump pump installation in the country is about $ 1300. However, the final price depends on many factors. If you are interested in the cost of adding a sump pump, want to know the price of adding a sump pump is, how much you will have to pay the plumbers and what additional costs must be considered, then you should definitely read our article. Our experts will be able to guide you properly on the rates and help you budget competently.

Prices for pump installation depend on the type of equipment

The average cost of installing a new sump pump largely depends on what type of equipment you want to put in. Today’s homeowners can install 2 basic types of pump: submersible or pedestal.

How much does it cost to install a submersible pump?

A special submersible pump is placed in the sump to divert water from the drainage system. It is worth noting that such a device will cost quite an impressive amount. Still, they are more effective in diverting water from the basement. The average cost to install a sump pump in the basement submersible type is 630 dollars. To spend the equipment installation precisely in areas that are often and seriously flooded. A submersible pump is characterized by a greater power, which does not work so loud. The service life of new equipment is up to 12 years.

Prices for the installation of a pedestal pump

This type of pump is installed directly on the ground, from where it will pump the water and transfer it to the drainage system or directly to the outdoors. The basement sump pump installation cost in the pedestal is much less than the submersible equipment. Still, the efficiency of the technique could be higher.

The price to install a sump pump in the basement is calculated based on the cost of the equipment itself and payment for the work. The pump itself will cost an average of $280. As for the place of installation, it is advisable to put it in an area where the basement is not so substantially flooded. The main advantage of the presented equipment is that it is quite easy and simple to get to it to repair, clean or inspect it if necessary. Pedestal pumps can last up to 25 years if the operating requirements are met.

How the price of pump installation is made up – what factors are taken into consideration when making the price list

The average cost to install a sump pump system depends on various parameters. Several factors influence the pricing:

No. 1: How easy is it to get to the installation site

In the basement of the house, the floor may be earthen – in this situation, digging a hole for the pump is much easier, which is not the case with a concrete surface. The cost of excavation is $300 to $500 total or $5 to $10 per linear foot. Suppose you have to destroy the concrete floor in the basement. In that case, the cost of installing a new sump pump increases significantly and averages $2,500 to $5,000.

No. 2: Where to work: Geography

The cost of installing a sump pump system largely depends on your state and the rates offered by plumbers from your region. This service will cost more in a big city than in the periphery. In addition, the geographical location also determines the rates for materials and permit fees.

No. 3: The complexity of the work

The average cost to install a sump pump in a crawl space depends largely on how much the craftsman will ask for the work. Labour often costs $45 to $200 an hour to install the equipment. If you need to put in a new pump, then on average, it takes up to 4 hours. If you need to replace the old equipment with a new model, it will take no more than 1 hour. Installation of this equipment involves not only plumbing but also electrical work. It’s also worth checking your state’s laws to make sure you need a permit for this work. It often costs $50 to $200, depending on the state.

No. 4: Whether you need to update or create a new drainage system

If you need a new drainage system or if you want to upgrade an old one, it will cost $400-12,000. It all depends on the interior perimeter of the basement, what materials will be used for it and other features.

No. 5: Is it necessary to install a backup battery

Cost to Install a sump pump with battery backup will be a bit more, but it’s a must in a location where power outages occur from time to time. When making a cost estimate, you should definitely consider this nuance.

How much money will have to be spent on replacing the sump pump

If you need to replace the old pump with a new one, you will often have to spend $300 to $1,000. At the same time, replacement is faster than installing new equipment from scratch. This is because it is easier to get to the equipment, and there is no need to perform groundwork or destroy concrete.

What else do you need to spend on during the installation

It would be best if you considered additional factors when planning the budget for installing pumping equipment in the basement. In particular, it is often necessary to add backup sump pump installation cost, money for maintenance, filters, backup batteries, and more to the estimate.

Flood Insurance

Even when a sump pump operates almost continuously, there is always the possibility of flooding. In this situation, it is wise to take out insurance on your property in case of flooding. On average, a policy will cost $800 per year. Insurance will often cover property damage in the form of the house itself and what’s inside.

Equipment Maintenance

Pumps definitely need periodic maintenance. On average, you’ll have to spend $250 a year on this, which is the cost of diagnosing the pump. The unit should be inspected for debris, potential clogs and other problems. If the equipment does not turn on, or you notice uncharacteristic strange sounds, you should call a master.

Carrying out repair work

Repairing a diverter pump can cost up to $500. It all depends on the complexity of the breakdown. The master can repair various technical units of the equipment – check valve, outlet pipe, motor and other elements. Before you repair the pump, you need to think thoroughly about what is more appropriate: repair the equipment or buy a new one.

Extra Battery

Suppose there are frequent power outages in your area. In that case, the cost to install a battery backup sump pump into the expense items is worth putting the cost to install. This will allow the pump to continue running even when there is no power. A battery backup pump will cost an average of $1,300 to install the equipment in your basement.

Backup water diversion equipment

The cost of battery backup sump pump installation should definitely be added to the estimate. This is a must for those homeowners who live in a fairly humid area where basements have a fairly high risk of flooding. In this situation, one pump isn’t enough.

Drain Pump Filters

For the submersible model to last as long as possible, you must change the filters promptly. With their help, it is possible to protect the pump from debris, solid particles and clogs. On average, this element will cost about $60.


In general, if you want to know the sump pump installation cost near you, you should explore several companies’ offers in your area. To gain experience in such work, it is best to turn to real professionals. They will promptly and qualitatively install the part, taking adequate money.

The process of installing a sump pump: how to do it right, practical tips

If you are experiencing significant problems with high humidity in the basement, and regular flooding, then you should install a sump pump in the basement. With the help of this equipment, you will be able to normalize humidity in your basement and protect your property from potential damage.

You can install this equipment by yourself or with the help of professionals. Consider our article if you want the best way to install a sump pump. In this material, we will consider the most important installation points and offer step-by-step instructions on how to do it correctly.

Varieties of sump pumps

The sump pump on the basement floor can be different. Residential homes often use two types of equipment – submersible (the pump is completely in the sump) or pedestal (the equipment is only partially hidden, while the motor is completely submerged in water). These models differ in cost, operation volume, performance, ease of repair, and maintenance.

Submersible models are quieter, so they are often installed in residential buildings. But they will cost a little more, and getting to them in case of failure is more difficult. Sump pump set up in the basement most often comes from qualified plumbers, but with the presented task can also cope an experienced home handyman.

Rules for installing the pump with a backup battery

The electric pump is characterized by fairly high efficiency and affordable cost. But at the same time, it has a significant disadvantage – the unit does not work in the event of a power outage. Due to a heavy downpour, the power supply is often cut off, so the pump can not work when needed. The optimal solution in this situation is a battery sump pump installation. The sump pump will pump water out of the pit if the power supply is normal. If the power goes out, the battery backup sump pump installation will allow the unit to start automatically when there is enough water in the pit. The battery backup sump pump will be continuously charged with an electric charger, so it is ready to go at a moment’s notice.

Installation of the presented unit is quite simple:

  • Put a check valve and trim its ends with Teflon tape.
  • The battery should be placed in a special plastic case that protects it from moisture. It should then be marked on an elevated surface – never on the floor. The outdoor enclosure with the battery is best placed on a shelf on the wall.
  • Make a pipe to drain the water.
  • Hook up the sump pump to the mains.

How to properly put a double-sided pump

A dual sump pump installation is the best option for securing your home against damage triggered by an overflowing sump pump and a non-functioning pump. With this system, you can keep your home safe from flooding. Installing two sump pumps in one pit means creating a large cesspool to accommodate the equipment.

The pair of pumps are operated alternately. In this situation, the work of each piece of equipment alternates – while one works, the second stands on pause. Suppose the water gathers in the cesspool rather quickly, and one pump cannot cope with the drainage at a certain point. In that case, the second pump is activated to increase water pumping efficiency and prevent flooding significantly. Also, if one pump fails, the second pump will continue its operation, with a corresponding signal that one of the pumps has failed.

Double sump pump installation with alternating units is more feasible than installing a backup sump pump, which will only come on when the main one breaks down or fails. The fact is that an unused pump is subject to detrimental corrosion, so it may also be broken by the time it is activated. If you want to put a duplex system, in this situation, it is worth following the main rule of installation – creating a really big pit. A larger pit takes longer to fill and pump out, which minimizes the number of pump motor starts per hour.

How to properly install a sump pump: step-by-step instructions

To solve the issue of constant flooding, you need to add a sump pump in the basement. If you decide to do the work with your own hands, then it is worth following certain instructions in this situation. Before this, you must gather all the necessary materials and allocate sufficient time to carry out all the necessary work. Putting a sump pump in the basement by an experienced craftsman takes only one day. In addition, the last stage will take a little longer to cure the concrete fully, so you should check the weather forecast and ensure that the next few days are not expected precipitation.

Installing a sump pump under the house helps preserve the exterior of the building. All work will take place inside and will leave almost no trace behind. It is best to perform these manipulations before the rainy season. It is also worth doing it in clear weather with no floods. The work is easier to carry out when the soil is fairly dry.

It is also worth deciding exactly how many sump pumps are needed for your home. Often, a backup sump pump set up in the basement will come on when the main unit fails. Installing a second sump pump is similar to installing the main sump pump.

Proper installation of a sump pump involves several basic steps:

No. 1: Preparing the installation site

The first step is to find the lowest point in the basement. That is often where most water accumulates. When you find it, you can dig a hole for the pump. It should be wide and deep enough to allow the unit to enter comfortably, with the top edge of the pump flush with the basement flooring.

No. 2: Prepare the pump, secure it against clogs, and place it in the prepared pit

Many models of sump pumps have special drainage holes at the bottom and sides to allow water to flow safely. If they are unavailable, you can drill them yourself after it is necessary to wrap the tank from the outside with a filter cloth so that the unit does not clog with sediment, silt and other particles.

It is also necessary to arrange the pit itself under the pump, filling the gravel at the bottom of a layer of 2 to 3 inches. Next, you must put paving stones or rocks on the gravel to put a stable platform under the pump. After that, you can safely place the pump in the prepared pit and backfill it around the perimeter with the earth. Ensure the pump is as stable as possible and does not wobble, even if you push it.

No. 3: Make sure the float valve is operating properly

The float valve must move up and down smoothly. When water is drawn in, it lifts the float, which is the signal to start the unit to pump it out. Be sure to check the operation of the float valve before proceeding with the installation. In this situation, move it up and down with your hand, ensuring it works freely.

No. 4: Lay the pipe from the valve, bringing it outside the building

Also of great importance for the quality operation of the unit is a check valve. It is the one that is responsible for taking the inlet out of the sump and preventing it from getting in. Between the valve and the facade of the building is certainly worth continuing the pipe. When the output of the hose joins the basement room wall, it is worth making a fairly large hole so that the pipe easily passes through it. In this situation, it is necessary to take a special tool with a ring nozzle to work easier. Also, it is worth treating it with sealant after the pipe passes through the hole in the wall.

No. 5: Connect the unit and check the operation

At this point, the sump pump connection is made, and a test run is performed. It requires filling a basin almost up to the top with water. The float should rise, and the water pump should start. It is also worth checking all connections to see if there is any water leakage. If everything works fine, you can close the bowl with the lid.

No. 6: Concrete the area around the pump

In the end, it’s worth covering the space around the pump. Often it is concreted. It requires mixing the concrete mixture with water to a fairly thick consistency and spreading the resulting mortar around the pump, with the need to cover everything except the unit’s cover. It remains only to wait for the complete hardening of the mixture, and the work is considered finished.

How to choose a basement waterproofing company: the best contractors 2023

If you notice that your basement is leaking, local waterproofing companies can help in this situation. The professionals’ main task is to help protect your home’s basement from water damage. Regardless of the purpose of your basement (as a full residential space or just a place to store things), it is worth protecting from mold and moisture. Take your time with this problem. It is best to start looking for foundation waterproofing contractors near you who can quickly and accurately cope with the problem.

Decent and reliable waterproofing basement companies near you will promptly send experienced and qualified workers to the site and provide a guarantee for the work performed. Presented companies offer a variety of basement sealing services. They are always ready to choose the best solution depending on the budget and complexity of the problem.

If you are looking for the best basement waterproofing near you, then you will certainly benefit from our article. We will tell you how to choose the right masters and which companies you can trust.

Criteria for choosing the best basement waterproofing company: what you need to focus on

If you start looking for waterproofing contractors near you, you may come across quite a wide variety of proposals. Top basement waterproofing requires a certain experience, a special approach, materials, tools and techniques. Only a qualified team of craftsmen can cope with this task at the highest level. If you are going to consider waterproofing companies near you, you need to know what criteria are used to choose the best contractor. Below, we’ve gathered a few of the most important parameters.

No. 1: Work schedule and geography

Some local basement waterproofing companies can cover quite large service areas. Some contractors may provide service to all states, while others only provide service to certain areas of the country. If you are looking for basement waterproofing companies in your area, include your city in the search box.

An equally important criterion for choosing the right contractor is their work schedule. Many companies, before you start the work, send their experts to the site to inspect it, assess the complexity of the work, offer the best solution and make an estimate. These actions should be performed as quickly as possible.

No. 2: The service of making an assessment of the condition of the object and calculating an estimate

Before the craftsmen get down to direct work, the craftsmen should draw up a plan and an estimate. A local basement waterproofing can only be performed by first examining the work front. Many basement drying companies in this situation send a special expert to the client’s house to inspect the lower level of the house. He should assess the overall condition of the basement to find possible structural changes in the walls and floor and inspect it for leaks and other problems. Based on this, it is decided how best to proceed in each case. In some situations, home foundation repair contractors may be needed to fix cracks and leaks first, after which waterproofing can be done.

No. 3: Finding the best solution for each project

A qualified wet basement company should be excellent at several methods of waterproofing. Many basement sealing companies use several approaches at once, inside and outside, to achieve excellent results in their work:

  • With the help of internal waterproofing, it is possible to eliminate cracks inside the foundation using special epoxy smog, sealant and other materials, also often inside the installation of a French drainage system is carried out;
  • External waterproofing often includes excavation work on the perimeter of the building and installation of a drainage system and other elements from the outside.

Additional services are also included in the scope of work of leaking basement repair companies. In particular, specialists can also lay drainage systems, install drainage pumps and do other related things. It’s worth noting that some of the best basement waterproofing companies near me can use unique, proprietary methods and products unmatched by their competitors.

No. 4: Additional repair services for the best possible service

Home foundation repair companies can also offer basement waterproofing services. Often these companies specialize in various basement problems and have all the necessary equipment and materials to restore walls and floors. Also, many wet basement contractors specialize in removing fungus and mold, which is a distinct advantage since such services only provide some. Still, virtually every second wet basement infestation occurs. It is best to look for dry basement companies that offer a full range of services rather than hiring several contractors at once so that each performs only a separate type of work.

No. 5: Warranty on Work Performed

Best exterior basement waterproofing and other types of work should have a warranty. At the same time, when choosing basement sealing companies near you, it is worth comparing several contractors’ warranty terms to find out whether insurance is available. Many foundation repair companies offer a fairly long-term warranty so the homeowner can be completely calm on this issue. If in the near future, the moisture feels itself again, you will not need to look for foundation repair companies in your area because you will be able to go to the same craftsmen who will again solve the problem.

Also, pay attention to the fact that house foundation repair contractors offer different warranty terms. That is because, in some cases, the warranty may only be valid for 2-3 years, while other contractors may provide lifetime warranties. Some interior waterproofing companies even stipulate that warranties can be transferred if the property is sold.

No. 6: Customer support

If you are looking for decent and reliable house foundation repair companies near you, it does not hurt to take care of the support of professionals. Proven craftsmen are always ready to help their clients with problems. Consider the company’s website if you want to find foundation repair contractors near you with full customer support. There should be contact phone numbers and other communication channels, so you can easily and easily ask for advice from a specialist at any time.